Horizon Structures Horizon Structures Bookmark Horizon Structures
Home | About Us | FAQ | How to Order | Testimonials | Visit Us in Person | Links | Contact Us  
Our Products
Photo Contest
Horse Barns
Florida Horse Barns
Run-In Sheds
Run-In Shed Kits
Modular Barns
L-Shaped
Horse Barns
Storage Sheds
Storage Shed Kits
Chicken Coop
Hay Feeders
Garages
Gazebos
Pool Houses

Stock Buildings Sale

Referral Rewards
Directions to Our Facility
Tips for Buying an Equine Property
Realtor Web Links
Horizon Blog
Horse Trailers
Gary's Tractor

Assembly Really is Easy
Wait a minute...SHOW ME THAT KIT AGAIN.

Before making our kits available to you, we wanted to make sure they're everything we're telling you they are..

So, we got two "volunteers" to put together a 10x20 "Frame Only" kit on our sales lot.

These are the only tools they brought with them:

  • Cordless drill (the bit comes with the kit)
  • Socket Wrench with 9/16" Socket
  • Hammer
  • 30' Tape Measure (50' or 100' is recommended for larger kits)
  • Small Crow Bbar
  • 4' Level (not shown)
  • 2 Ladders (not shown)

    		•
    Start With A Solid Foundation


    Insert the bolts thru the splice plates
    Make sure the frame is level

    The most critical part - and the most time consuming - is to make sure the foundation is square and level.

    Vic and Marie took extra care when putting together the base before going forward with the wall supports and roof trusses.

    As you can tell from these pictures, our parking lot is definitely NOT level! Vic needed to block the foundation runners in several places.

    TIP: Don't fully tighten the nuts on the splice plates
    until your base is square.

    Blocking may be needed Make sure the frame is square

    TIP: After your frame is completely assembled,
    you can remove the blocking.

    Remember...

    ALL PRE-ASSEMBLED:

  • Trusses
  • Wall Panels
  • Uprights
  • Headers.

    • ALL INCLUDED IN THE KIT:

  • Pressure Treated Runners - PRECUT
  • Steel Corner Bracket
  • Steel Splice Plates
  • Bolts, Nuts, Washers, Screws


    		•


    After the base is together, the rest of the assembly
    is just a logical step-by-step process.

    To keep things going smoothly, Vic and Marie's lay out the
    upright supports and the wall panels for the back wall.

    Except for the foundation runners, the rest of the
    kit components are already put together for you.

    One person should steady the piece...
    2 People -
    Less than 3 Hours!
    ...While the other person screws it on

    Attention to Detail..Keep edges flush

    By following a few simple guidelines and paying attention to the details, it's amazing what teamwork can do!

    Hold edges tightly together before attaching

  • One person should hold each piece while the other person screws it together.


  • Take care to keep all sections tightly together and edges flush while attaching them to the base and to each other.

  • Lay out the sections for the front just like the back.

    • Lay roof trusses on top of frame

  • Working together, place the trusses atop the frame.
  • Starting at one end, screw them in to place - one by one.

    •  

     

    BACK TO MAIN KIT PAGE

    Final Tip:
     When you start putting the pieces of your frame together, a single screw to hold the pieces in place should be sufficient.

    Always set these initial screws at an angle.

    Secure with screws 16" apart

     

    After your frame is complete, go back and add additional screws - as indicated by this picture - to more permanently and securely attach the frame components.


     

     


    CLICK HERE FOR PRICING

    Call 1-888-447-4337 to Order

    *Online Ordering Coming Soon!


    Final Thought...

    "When Horizon first started to look at the idea of a kit, I was somewhat skeptical. There are alot of kits available in the marketplace...How could we compete?

    After seeing this kit put together, there is NO DOUBT in my mind that
    our kit is the best

    They key is that this kit is virtually put together before you even start. Vic and Marie had the frame
    completed in 2 1/2 hours.

    The pieces fit together so perfectly and so tightly that - for some of the sections - Vic had to knock them in with his hammer.

    Even before the last screw was set, the frame was absolutely tight, strong and true. No wobbling - no shaking.

    I am extremely impressed and proud to be able to offer this product to our customers!"

    Jill Siragusa, Sales & Marketing Manager - Horizon Structures, LLC.



    Track your Horizon Structures Kit Shipment Online

    Horse Barns | Run-In Sheds |
    Modular Barns | Monitor Horse Barns | Low Profile Horse Barns | High Profile Horse Barns |
    A-Frame Sheds | Board & Batten Sheds | Dormer Sheds | Garden Sheds |
    Hip Roof Sheds | Hywall Sheds | Mini Barns | Quaker Sheds |
    Garages | Single Car Garages | Double Wide Garages | Board & Batten Double Wide Garages |
    Chicken Coops | Pool Houses | Gazebos | Horizon Structures Blog


    View Our Guarantee to You | Terms & Conditions | Horizon Structures Sitemap

    Horizon Structures - 5075 Lower Valley Road, Atglen, PA 19310
    Phone : 1-888-44SHEDS - Fax: (610) 593-7701 - info@horizonstructures.com

    © Sheds & Gazebos, All Rights Reserved.
    This site's web design and hosting provided by EZSolution Corp., Lancaster, PA.