| Time and time again
customers ask if our structures are available in kit form.
Finally, we've got something we think is better and easier
to put together than anything out there.
Our new run-in shed frame kit may be just what you've been
searching for if you can answer "YES" to any of the following
questions:
Are you a die hard diy-er?
Are you looking for an alternative to a metal pole building?
Do you want to save money on freight charges?
Is your location too difficult for delivery of
a pre-built structure?
THIS IS NOT
A
METAL POLE BARN
We believe
a barn is supposed to look warm and inviting not cold
and industrial.
This kit is ALL WOOD.
NO Holes to dig.
NO Cement to pour.
All you need is a
level piece of ground.
We couldn't find anything like it so we made our own.
|
"The shed was an absolute snap to
put together, everything was exactly the way it should have
been, and we had it together in just about 3 hours.
It was a huge time saver to use your kit,
and now that the walls and roof are on, the horses are loving
their new home.
I have already told several folks about
your company and how great the kit was, and absolutely will
refer anyone who asks! I am very impressed with your company!"
Leslie K, Berlin, MA
|
10 x 20 Completed "Frame Only" Kit
|
We
Get You Started..
These are NOT just the plans. The kit, including
everything listed below, is delivered right to your door by
common commercial carrier.
REMEMBER:
- Trusses
- Wall Panels
- Uprights
- Headers..
ALL PRE-ASSEMBLED.
- Pressure Treated Runners - PRECUT
- Steel Corner Bracket
- Steel Splice Plates
- Bolts, Nuts, Washers, Screws
...ALL INCLUDED
IN THE KIT.
CLICK
HERE FOR MORE DETAILS
ABOUT THE KIT MATERIALS
OUR FRAME KITS ARE EASY!
We've made sure it's easy to assemble. Each Horizon Structures
Frame Kit (including the Complete Kit) comes with easy-to-follow
printed instructions AND an instructional DVD.
We're NOT KIDDING
when we tell you our kit is
EASY TO PUT TOGETHER!
CLICK
HERE
TO CHECK IT OUT!!! |
5
EASY STEPS
"We tested our new kit and we think - of all the steps
- the foundation runners are the trickiest part. You just
have to make sure the base is square and level. Once you have
that done, the rest is easy."
- Marie C, Newport, PA
|
No
"special" tools are needed, either.. 
Electric or Cordless Drill (we supply the drive bit)
4' or 6' Level
Tape Measure (50' or 100' for larger kits)
9/16" Wrench or Socket
Hammer
Pencil
Square
You
Add the Finishing Touches..
After your frame is complete, finish it with your choice
of roofing and siding to make it truly your own.
Take it one step further and add a floor, windows and doors
to create an attractive and durable storage building.
|
Home
